Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 116)

Simrad MX500 | 115

Depth - NMEA Input Control

This screen allows you to congure the depth unit (me-

ters, feet, or fathoms) for the NAV 4 and TIDE 1 screens.

Depth information is accepted by the receiver from the

NMEA 0183 data sentence DBK, DBS, DBT, or DPT on any

input NMEA port. Refer to the Installation section of this

manual for hardware interface instructions.

Press the EDIT key and move the cursor to the Echo

Sounder Connected line. Use the Change softkey to acti-

vate the input data options described below:

Depth Unit - select between meters, feet, or fathoms.

This data field sets the depth unit displayed in NAV 4 and

TIDE 1, regardless of whether a sensor is connected or

not.

Echo Sounder Connected - causes the receiver to look for

one of the appropriate NMEA 0183 data sentences when

set to Yes.

Data Input Port No. - Select the appropriate NMEA 0183

port that the sensor is connected to (Port 1 or 2). Ports

3 and 4 are reserved for the MX antenna controls.

Offset - Input the appropriate offset for the sensor,

based on the measurement you are most interested

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 261 262

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 116