Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 133)

132 | Simrad MX500

XTE Limit:

Sets the distance left or right from the course line you

consider to be the maximum allowable off-track error

(known as cross-track error, “XTE”). The PLOT screens

will display the scaled cross-track error distance. The

NAV screens will indicate the cross-track error in numer-

ical format and present the cross-track error graphically

scaled left or right of the course line.

XTE Alarm:

Causes an alarm to sound if your position exceeds the

maximum XTE Limit defined above when Yes is selected.

To disable the alarm, select No (default) with the Change

softkey.

WPT Pass Criterion:

Sets the waypoint passed determination method. There

are five methods available:

Complex:

This is the default setting. Passing the waypoint is de-

termined by reaching an imaginary perpendicular line.

Or you can pass the waypoint by crossing the bisector

line of an acute angle (providing you are within 0.2 NM of

the waypoint) or an obtuse angle between your present

course line and the next leg of your route.

Manual:

Passing the waypoint can only be accomplished by

manually skipping a waypoint. Refer to the Skipping and

Unpassing Waypoints in the Route section of this manual.

This is a great way to perform station keeping maneu-

vering. Refer to the Plot Screen Use Examples in the Plot

section for further details on this application.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 261 262

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 133