Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 58)

Simrad MX500 | 57

Highlight the 4 Reverse Direct softkey and press

ENT.

Press the 5 EDIT key. It’s that simple!

Notice that you still keep the same orientation on the

screen, in other words, you always read from the top of

the screen to the bottom of the screen. The waypoints

are rewritten in reverse order for you.

ETA Setup

If you choose to use this function, it is probably better

to operate the unit in UTC time mode if you are going to

cross one or more time zones. Note that the time entered

uses the offset to UTC applied in the CFG1 Time display.

The software calculates Estimated Time of Arrival based

on how you configure the unit. ETA settings are con-

trolled from the RTE1 screen. To change the ETA set-

tings:

Select the 1 RTE key until the RTE1 screen is dis-

played.

Press the 2 EDIT key.

Highlight the 3 ETA/SOG Calc. softkey and press

ENT.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 261 262

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 58