Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 76)

Simrad MX500 | 75

WPL - Waypoint with Symbols & Description -

NMEA 0183 Expanded:

Latitude and Longitude of specified waypoint. The con-

tent of this sentence will normally be the position of the

next waypoint in the route.

The CFG1 NMEA out WPL has a special “Send All” option.

Selecting this feature will send all the waypoints in the

Waypoint Bank once independent of the WPL sentence

setup as ON or OFF. This format does not strictly con-

form to the NMEA 0183 standard, and may not work with

all equipment. It is provided for your use to store data on

a PC using normal ASCII text editors.

WPL can be sent as version 1.5, 2.0 or 2.1.

field#: 2 3 4 5 6 7

$GPWPL,llll.ll,a,yyyyy.yy,a,cccc xxxxxxxxxxzzzzzzzzzz*hh <CR><LF>

explanation / actual use:

2 & 3: Waypoint Latitude, North or South, N/S number of

decimals can be set to 2, 3, 4 or 5 (default 2).

4 & 5: Waypoint longitude, East or West, E/W number of

decimals can be set to 2, 3, 4 or 5 (default 2).

6. Waypoint identifier; 4 place numeric waypoint

number, followed by 1 space, followed by 10

characters for the top line of the description, fol-

lowed by 10 characters for the bottom line of the

description. When this field is output, you may

see spaces between the xxx and zzz. These are

“fill characters” and are necessary to fulfill the 10

character count to maintain character placement

when read back into the CDU.

7: Checksum can be set on or off (default on).

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 261 262

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 76