Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 167)

Appendix E - AIS connection for MX512 only| 165

Note: When editing critical transponder setup items use the administrator password

“admin”.

Ship:

Enter the vessel name up to 20 characters (administrator password required). The

symbol ©©©©© indicates name is not available.

Call Sign:

Enter the 7 character vessel’s call sign (administrator password required). The symbol

©©©© indicates call sign is not available.

IMO Number:

Enter the 9-digit IMO identification number when available (administrator password

required).

Chnl A and B TX Mode:

Use the

softkey to select between Transmit or Silent (administrator password

required).

MX Ant.and External GPS:

Use the

softkey to select between Primary and Secondary. The MX Ant is

defaulted as the primary source of GPS data while the Ext. GPS is set as the secondary.

MX Ant A, B, C, D:

These are four dimensions from the bow, stern, port beam, and starboard beam to the

horizontal reference point on the ship for the MX421 GPS antenna used by the MX512/

AIS unit. The sum of A + B is the length of the ship in meters, and the sum of C + D is

the width of the ship in meters. Default values are zeroes.

Ext GPS Ant A, B, C, D:

Specify the position offset of the external GPS antenna (similar to the Int. GPS Ant

A,B,C,D).

AIS GPS Ant A, B, C, D:

Specify the position offset of the GPS antenna used in the MX423 AIS transponder

(administrator password required).

Data Timeout:

Normally set to 360 seconds. Controls the time the AIS target is displayed before it is

dropped out of the PLOT3 screen if no new message is received.

Sensor 1, 2 or 3 Baud Rate:

Controls the output baud rate speed of the MX535A Sensor ports. Default is 4800 baud.

Softkey Descriptions:

Used to enter the administrator password to change critical AIS transponder

setups that require the administrator password.

Used to toggle through various selections available in the field.

Antenna Offset

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 167