Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 23)

Keypad & Display Description | 21

GOTO

This function key allows you to quickly create a route from your present position to

waypoint or a route. This single waypoint route can use an existing waypoint from

the Waypoint Bank, or you can quickly create one by either defining the appropriate

coordinates or specifying a range and bearing.

Be careful when you use this selection, as it will erase your current active route when it

creates the new one. Read through the ROUTE and PLOT sections of this manual to find

other ways to use this key within an active route.

POWER ON/OFF

This DUAL function key turns the unit on and off. When depressed momentarily while

the unit is on, you will be prompted to select a YES or NO softkey to confirm your action.

This is known as a software power off.

If the operating program should hang up for any reason, you can also perform a

hardware power off by pressing the power key for about 5 seconds. When the GPS is

turned off using this technique, you can not reapply power for 10 seconds.

An occasion may arise when you need to reset the memory back to the factory default

values. Doing this will cause the CDU to lose all of your dened settings, as well as all

2,000 of your waypoints and routes. If you hold down the “CLR” button when power is

applied for about six seconds, then the memory will be cleared.

CLR (CLEAR)

This function key is probably the least used of all the function keys; however, it can save

you some otherwise frustrating editing time. This key allows you to erase or clear one

character at a time. If you hold it down, it will erase the entire line that the cursor is

currently on.

Holding this button down for 6 seconds will clear the entire memory of the MX51x CDU.

CURSOR

This function key is the most used of all the function keys. When pressing the EDIT key

to activate the virtual softkeys, the LEFT and RIGHT arrow cursor keys are used to scroll

left and right from one softkey to the next. It also allows you to move between function

screen pages (by pressing left or right). In addition, many of the edit fields allow you to use

either the cursor key or the Change softkey to scroll through or select from predetermined

choices.

ENTER

This key is often used just like the EDIT and the CURSOR keys. When pressing the EDIT

key to activate the softkeys, the ENT key is used to select the particular virtual softkey of

user’s choice.

DAY/NIGHT View

Press this key to toggle between night or day view.

When depressed for a few seconds, this dual function key allows you to quickly switch

between two predetermined display lighting conditions, day or night time settings.

You may also control the day/night view using the CFG => Lighting menu.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 23