Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 44)

42 | Keypad & Display Description

Then press the 10 EDIT function key to end editing.

You can press the EDIT key when you finish editing a waypoint. This is treated

the same as highlighting the Done softkey and press ENT. Highlighting Done then

press ENT allows you to continue editing and entering other waypoints.

Waypoint Lock/Unlock

Locking a waypoint forces the user to consciously unlock the waypoint before it can be

modified and prevents the waypoint from being overwritten when waypoints are being

input over the data port. Note that when a waypoint received on the data port has the

same waypoint number as a locked waypoint already stored in the CDU, the waypoint

data received on the data port is disregarded and lost. Waypoints are locked by one of

three methods: 1) selecting Lock this WPT when in the waypoint bank edit mode for a

particular waypoint; 2) selecting Lock this WPT when in the waypoint bank edit mode; or

3) incorporating a waypoint into a route stored in RTE2 and then locking the route.

Waypoints that are locked from the waypoint bank are indicated by a closed padlock in the

display. Waypoints that are party to a locked route will display a message indicating that

waypoint can not be modified.

To Lock a Waypoint

Press the

1 WPT key to display the WPT1 screen.

Scroll to the desired waypoint.

Press the 3 EDIT key.

Highlight the 4 Lock this WPT softkey then press ENT.

Press the

5 EDIT key.

To Unlock a Waypoint

Press the

1 WPT key.

Scroll to the desired waypoint.

Press the 3 EDIT key.

Highlight the 4 Unlock this WPT softkey then press ENT.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 44