Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 34)

32 | Keypad & Display Description

Creating a Multi-Waypoint Active Route

There are four methods to create a multi-waypoint route:

Insert By Number

• - allows you to type in or scroll through in numerical order using

the cursor key, waypoints that you previously stored in the Waypoint Bank (see WPT

later in this manual).

Choose In Bank

• - allows you to sort and scroll through the waypoints stored in the

Waypoint Bank (WPT) by various techniques (symbol, date, distance from present

position, numerical order, alphabetical order, or search by user defined string). This is

a great tool if you can’t remember where you stored the waypoints you want to use.

Insert New Waypoint

• - allows you to define new waypoint coordinates, define a

waypoint by using Bearing and Distance from an existing waypoint, and enter them

into the route and the Waypoint Bank at the same time.

Insert Route

• - allows you to copy a previously defined route in the RTE2 screen to the

active route. This choice is only displayed when one or more routes are defined in the

RTE2 screen.

Our experience has shown that you are likely to choose several of these methods at any

given time to create a route. You can mix any of these routines to create routes, amend

routes, or insert waypoints in the middle of existing routes. The software is designed to be

as flexible as possible to meet your changing needs.

The following four sections are examples of how to use each of the four basic functions

outlined above. We encourage you to experiment using all of the methods available to

find the one that best meets your needs. As long as you are working in the RTE1 screen

and sitting at the dock, you are not going to do any damage (e.g. erase waypoints in the

Waypoint Bank or routes in the Route Bank), so have some fun and find out how helpful

this GPS receiver really is.

If you are already comfortable with setting up a basic route, you might want to skip the

examples which follow and jump ahead to the Maneuvering Within the Route section later

in this section to understand some of the more advanced features of the software.

Insert By Number

The following example assumes RTE1 is empty. Follow the directions in the Erasing an

Existing Route section to start with an empty route if you have waypoints in the RTE1

screen.

Select the

1 RTE key until the RTE1 screen is displayed.

Press the

2 EDIT key to enter the edit mode.

Highlight the

3 Insert softkey from the display and press the ENT key. Skip to the

next step if RTE1 is empty.

Highlight

4 Insert by Number softkey from the display and press the ENT key.

Use the EDIT keypad to type in the number you want or the beginning number of 5

a range you would like to select from, or use the cursor key to scroll through the

previously stored waypoints in numerical order.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 199 200

Comentarios a estos manuales

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 34

Comentarios a estos manuales