Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 96)

94 | Keypad & Display Descriptione

VGA

This menu is available in the MX512 model only. It controls the VGA output display base

(background) and font colors.

To control the VGA output, do the following:

Press the EDIT key to bring up the cursor.1

Press the ENT key to turn the VGA feature to ON.2

Press the down arrow key to scroll down to Base Color.3

Press the ENT key repeatedly until the color desired is shown.4

Scroll down to Font Color.5

Press the ENT key repeatedly until the deired color for font is shown.6

Press the EDIT key to exit.7

Wind

The MX51x will display wind information in the NAV4 screen when connected to a NMEA

0183 sensor which can provide the MWV or VWR sentence.

Data Input Port: 1 (default) or 2.

Wind Speed Unit: miles per hour, meters per second, knots, kilometers per hour.

Alarm If No Data: Allows you to receive an audible and visual alarm if NMEA 0183 data

is not being received on the data port at regular intervals (typically every few

seconds). The available choices are Yes (default) or No.

AWA Offset: Allows you to input a constant angle correction value.

AWS Correction Factor: Allows you to input a wind speed correction factor.

Input Sentence: Specifies the NMEA 0183 data sentence to read the depth data from.

The available choices are Any (default), MWV, or VWR sentence. It is better to

specify the appropriate sentence, because more than one method of reporting

wind may be available on the port.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 96