Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 78)

76 | Keypad & Display Descriptione

Whether a unit is a slave or repeater, it will still share a common waypoint and route

database as the master. Refer to Appendix C for more detailed information about the

dual-control and multiple unit control setup and operation.

CFG1/LAN menu must be setup before enabling the Dual-Control feature. A dual control

system consists of one Master and one Slave. A Multiple Unit Control (MUC) system

consists of one Master, at least one Slave (maximum of two), and up to three (if any)

Repeaters. A multiple unit control system must contain a minimum of three MX51x and a

maximum of ve MX51x units altogether.

In a Multiple Unit Control conguration, this option must be enabled (by changing Dual

Control to Yes) for all Slave and Repeater units before enabling it in the Master unit.

MX51x Dual Control Menu

GPS - Elevation Mask Control

This screen controls the elevation mask angle, or the angle above the horizon, at which

the MX51x will attempt to track a satellite. Satellites with an elevation below this angle

will be tracked but will not be included in the position solution. You can set the elevation

limit to any value up to 90°. For most marine applications, the default limit of 5° is

appropriate.

The Antenna Offset allows you to virtually offset your antenna location. That is, if you

are forced to place the antenna in a location other than where you want your position

fix calculated (due to superstructure or other high power antennas), you can place the

antenna in a practical location. Then enter the appropriate Antenna Offset, and the

MX51x will calculate your position in the place where you would have preferred to place

the antenna.

The RAIM menu is available only in MX51x models where the RAIM feature is enabled. For

more detailed information about RAIM, please refer to Page 67 of this manual. Standard

MX51x CDU will only show the Elevation mask and Antenna offset menu items.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 78