Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 63)

Keypad & Display Description | 61

MX510 AUX7 Screens

MX512 AUX7 Screen

This also activates several engineering screens (the same as turning Engineering Display

to Yes in CFG1 Operation). Refer to Appendix B - Engineering Mode for more details.

AUX 10 - Tide

There are two TIDE screens, which are located under the AUX option. The AUX 10 screen

displays graphic and digital information about the tide conditions at your present position.

This is based on tide table constants that you must enter in the AUX 11 screen, then

access through the AUX 10 screen. You can store up to 100 tide tables in AUX 11.

The following CFG1 menus directly impact the TIDE functions:

Depth - sets the measurement units in meters, feet, or fathoms.

•

The Tide function is not active until the antenna is detected.

Current Tide Display

This screen provides the current tide conditions for the tide constants indicated in

the upper left hand corner. The number in the upper left corner of the window is the

identification number of this table in the British Admiralty Tide Table and in the AUX 11

screen. The name to the right of this number is the port name you entered in the AUX

11 screen.

A graphical representation of the tide is given in the middle of the screen. The tide peak

references are given to the right of the High/Low time on the right of the screen. High/

Low tide times are given to the right of the graph. The marker time (indicated by the clock

icon or + sign in the graphic area) and tide condition are given below the High/Low tide

information.

The tide marker automatically updates to the current time. When the tide marker is in

the automatic mode, the cross-hair indicator is enclosed with a circle . You can move the

marker forward or backward in time using the up or down arrow keys. Return the marker

to the present time by simply highlighting the Marker to Now softkey then pressing the

ENT key. When you move the tide marker off of the present time, the marker changes to

a + sign. The marker will remain at the manually positioned mark until you either select

one of the manual marker control softkeys, or until you highlight the Marker to Now

softkey and press ENT - which returns the marker to automatic mode.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 63