Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 39)

Keypad & Display Description | 37

Highlight 6 Insert Reverse softkey, press ENT.

Press the 7 EDIT key to exit.

Notice that you still keep the same orientation on the screen, in other words, you always

read from the top of the screen to the bottom of the screen. The waypoints are rewritten

in reverse order for you.

ETA Setup

If you choose to use this function, it is probably better to operate the unit in UTC time

mode if you are going to cross one or more time zones. Note that the time entered uses

the offset to UTC applied in the CFG1 Time display.

The software calculates Estimated Time of Arrival based on how you configure the unit.

ETA settings are controlled from the RTE1 screen. To change the ETA settings:

Press the

1 RTE key until the RTE1 screen is displayed.

Press the

2 EDIT key.

Highlight the

3 ETA/SOG Calc. softkey and press ENT.

Highlight the 4 Change softkey and press ENT to select which value you want the

CDU to calculate, either ETA based on speed, or speed (SOG) based on desired

time and date of arrival.

SOG Based on Arrival Date & Time:

Enter the arrival time and date. Be sure to enter the date as day, month, year, as 1

indicated on the screen.

Highlight the

2 Done softkey and press ENT.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 39