Memorex RX 1 Smart Manual de instalación Pagina 189

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 200
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 188
Appendix E - Glossary | 187
CURSOR
A flashing rectangle superimposed on a character position in the display window,
indicating that a charac ter may be entered in that position, or that the existing
character may be changed via the keyboard.
DATUM
The framework on which the coordinates used to define position on the Earth’s
surface are based. In the navi gator, a datum is defined by the following
parameters:
A and I/F. Size and shape of a reference ellipsoid.
DX, DY, DZ. Position of the reference ellipsoid origin in relation to the satellite
datum ellipsoid origin.
DEAD RECKONING
The process of determining changes of position based on measured speed and
course over measured time periods.
DECCA LINES OF POSITION (LOPs)
The phantom Decca Lines of Position used in the navigator are based on
mathematical models. Local deviations in propagation speed are not included.
The calculated positions may therefore differ from positions obtained from
dedicated Decca receivers by several hundred meters.
DEFAULT
A condition that the navigator assumes automatically if no other condition is
initiated by the operator.
DEVIATION (COMPASS)
Magnetic compass reading error due to local magnetic field influences.
DGPS
See DIFFERENTIAL GPS.
DIFFERENTIAL GPS (DGPS)
A method of refining GPS position solution accuracy by modifying the locally
computed position solution with correction signals from an external reference GPS
CDU (monitor).
DILUTION OF PRECISION (DOP)
A figure of merit for the quality of GPS-derived position and clock bias estimates,
based on the geometry of the selected satellite constellation. The smaller the
DOP, the less the magnification of the range measurement error into position and
clock bias errors. Generally, the more spread out the satellites, the lower the DOP.
The most common DOPs are as follows:
HDOP - Horizontal dilution of precision.
GDOP - Geometric dilution of precision.
PDOP - Position dilution of precision.
VDOP - Vertical dilution of precision.
EARTH FLATTENING COEFFICIENT
See COEFFICIENT OF EARTH FLATTENING.
ECDIS (Electronic Chart Display and Information System)
EDIT
To modify existing display data via the keyboard.
EDIT MODE
The state in the navigator where it is possible to enter or change data. EDIT
MODE is accessed by pressing the E-key. Press the E-key once more to ENTER the
data into the memory and leave EDIT MODE.
Vista de pagina 188
1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 199 200

Comentarios a estos manuales

Sin comentarios