Memorex RX 1 Smart Manual de instalación descargar pdf (Pagina 94)

92 | Keypad & Display Descriptione

Security

The Security screen allows you to lock out the EDIT key in order to keep crew members

or visitors from changing settings that you have made. Once this feature is enabled, a

press of the EDIT key will require the correct password to gain access. To disable the

security functions, you will be prompted to enter a 5 digit password. You will then be

prompted to reenter the password. The security function is then disabled until you enter

a new password through the CFG1 Security screen again. Be sure to keep your password

in a safe place. If you lose your password, you will need to call the factory to reset the

security feature.

Serial I/O

This menu provides a means to verify the status and baud rate settings of all the NMEA

ports. Note that the NMEA ports 3 & 4 are reserved for the Smart antenna GPS and

Beacon receiver interface. You have no control in these two ports. You can not change

the baud settings in its original values.

MX51x Serial I/O Menu

Time - Mode and Format Control

This menu item sets the method in which time is displayed on the CDU.

Time System: Sets the time to UTC (default) or Local. When Local is selected, several

parameters associated with local time are displayed.

Time Format: Sets the time to either a 24 Hour (default) or 12 Hour clock.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 199 200

Sin comentarios

Memorex RX 1 Smart Manual de instalación Pagina 94